Description
Stove uses a high pressure* 100k BTU propane burner and thermocouple for safety. The stove is setup for external air intake (5″) and exhaust with 4″ flue pipe, to terminate in to B-Vent. This stove is compatible with all of our wood stove accessories like water tanks, heat shields, etc. Comes with the high pressure regulator needed for the burner
Here is a video where we test the stove in our fish house getting it from 40 to 120F,
*NOTE: Minimum 2psi required, if using a large rural propane tank you will need to tap into the line before the regulator that supplies low pressure (.5 psi) to the house.
Matthew Eaton –
This stove is built like a tank. Arrived in perfect condition thanks to thoughtful shipping prep. I have a 8’x4′ sauna, pretty seriously insulated with mineral wool insulation, wrapped with sauna foil, no windows, in a heated garage. It’s the dead of winter so garage stays at around 50 degrees. Have it vented through the roof with b-vent. Takes about 1.25 hours to get to 170. We’ll see if that changes in the summer. I’m happy with this purchase. It would be a no brainer for an outdoor sauna. Will say though – by nature of it containing a big ole propane burner – it’s loud. Contrast to the quiet you normally experience in a sauna.